Land Pride RCR2672
Features
FEATURES | BENEFITS |
Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
5 Year gearbox warranty | Shows Land Pride's confidence in gearbox integrity. |
110 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
Cat. 4 driveline with 4 plate slip-clutch | Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts. |
Cat. l or ll 3-point hitch | Allows use on a wider variety of tractors. |
Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
Heavy 10 gauge deck construction | Can withstand more abuse than lighter gauge decks. |
1/4" Side panels for overall reinforcement | Also protects sides from debris being thrown against them from the blades. |
Fully welded deck | Robotically welded. Adds additional strength and reduces rust. |
Extended front tapered deck | Contains and discharges material better. |
Round back design | Allows for more efficient handling and dispersing of material. |
9" Deck Height | Allows cutter to handle heavy cutting conditions. |
2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
High cutting capacity | Can cut brushy areas with saplings up to 3". |
Full length skids with replaceable shoes | Full length skids protect side plate structure, replaceable shoes for convenience. |
1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
High blade tip speed | 60" =12,384 fpm and 72" = 14,861 fpm |
3" Dia. cutting capacity | Can aid in clearing brush. |
Rugged laminated tailwheel | Can't go flat. Choice of single or dual combination. |
Chain or rubber shield option | Located on front and rear. Reduces flying debris. |
Specifications
Model | RCR2672 |
Machine Weight (with Chain Guards) | 1046 lbs |
Hitch | Category l or ll Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready |
Cutting Width | 72" |
Overall Width | 79" |
Overall Length (Including Tailwheel) | 126" |
Deck Height | 9 1/8" (Bottom of Deck to Bottom of Skid Shoe) |
Cutting Height | 2" - 12" |
Cutting Capacity | 3" |
Recommended Tractor HP | 40-130 maximum |
PTO Speed | 540 rpm |
Gearbox | 540 rpm PTO Driven Gearbox 1:1.46 Speed-Up Beveled Gears Cast Iron Housing |
Gearbox Lubrication Capacity & Type | 7 pints of 80-90W EP oil |
Gear box Input/ Output Shaft Size | Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia. |
Deck Construction | All welded construction |
Deck Material Thickness | 10 Gauge |
Side Panel Thickness | 1/4" |
Skids | Replaceable |
Stump Jumper | Round Pan 3/16" x 30 1/2" |
Blades (2) | 1/2" x 4" x 29" Heat Treated Alloy Steel Free-Swinging High Lift |
Blade Bolt | Keyed with harden flat washer and lock nut |
Blade Tip Speed | 14,861 fpm/788rpm |
Driveline | ASAE Category 4 |
Driveline Protection | 4 Plate Slip Clutch |
Tailwheel Mount Assembly | Welded arm and Caster Fork |
Tailwheel | 4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings |
Front Guard | Optional: Chain Guard Available through Parts Department: Rubber Guard |
Rear Guard | Optional: Chain Guard |